User: WinZip, Location: Massachusetts
Asked on: Saturday, March 5, 2011 at 11:36 am EST
Answered on: Tuesday, May 14, 2024 at 2:22 am EDT
Question: Hello Folks,I have a question for any SQ D techs if any are on this forum.We have a residential service existing 400 amp single phase 120/240 Volt and will be adding service to this panel for pool equipment, 6 motors ? total 18 HP and small lighting load for 10 LED lights.Plan is to supply 100 amp feeder to pool sub panel for 5 motors an lighting load, total calculated load for this = 78.8 Amp - an run separate 50 Amp service for the added 7 ? HP motor for swim featureThis is a SQ D MDP panel NQODY an my question is does any one know if this 400 Amp main is rated for 100% - I thought I would ask here today an maybe a phone call to SQ D on Monday.Thanks in AdvanceWinZip
Hi WinZip,I'm not an SQ D tech, but I can try to help you find the answer to your question.According to the Square D website, the MDP panel NQODY is rated for 100% of its continuous current rating.[SQ D - MDP Panel Specifications](https://www.se.com/ww/en/product/NQODY125/mdp-main-lug-only-distribution-panel-125a-3-pole-4-wire-bolted-type-main-lug-only-panel-plug-on-neutral/)
However, it's always best to consult with a qualified electrician to ensure that the panel is properly sized and installed for your specific application.Here are some additional resources that you may find helpful: [Square D MDP Panel Installation Instructions](https://www.se.com/ww/en/download/document/3007478/) [National Electrical Code (NEC) Article 408](https://www.nfpa.org/Codes-and-Standards/All-Codes-and-Standards/List-of-Codes-and-Standards/Detail?code=70)I hope this helps! Let me know if you have any other questions. Flag for review