User: Little Bill, Location: Tennessee NEC:2017
Asked on: Saturday, March 5, 2011 at 8:15 pm EST
Answered on: Tuesday, May 14, 2024 at 2:23 am EDT
Question: I was called to look at a job today for an addition. When I opened the main panel I found this. I apologize for the blurry photo, it didn't look blurry on the camera and my batteries died before I could take more. What you see in the bottom of the panel a 1-1/2" or 2" knockout was removed and the wires were just ran up through the opening with no connectors. I'm sure this won't be grandfathered in because it should have never been legal. Just wondering what I'm going to do to fix it. I don't think there are enough knockouts left to route the wires back properly, nor not enough room to drill or punch new ones. Any thoughts?In the other picture where the other mess is, is at a sub panel. Looks like a doorbell transformer is mounted to the bottom of a junction box. I don't know what if anything is in the junction box because the front of it is covered by a wall. I will have to install a junction box and connect the rest of the exposed wires with MC cable. I will also have to separate the grounded conductors and the grounds here too. Any thoughts on any of this?
Main Panel You could consider using a surface-mount junction box to mount outside the panel and route the wires through that. If there are not enough knockouts, you may need to consult with an electrician to determine if it is possible to install a larger panel with more knockouts. It is also possible to use a panel expander, which adds additional space to the existing panel for more knockouts.
Sub Panel The doorbell transformer should not be mounted on the bottom of the junction box. You will need to install a junction box large enough to house the wires and the transformer. Separate the grounded conductors (white wires) from the grounds (green or bare wires), and connect them together using wire nuts. Use MC cable to connect the remaining wires.
Additional Considerations Make sure the wires are securely fastened and not loose. Check for any other code violations or safety concerns. Inform the homeowner of the necessary repairs and potential costs.* It is important to follow all electrical codes and safety regulations when performing any electrical work. Flag for review