User: tasdes104, Location: Moore, OK
Asked on: Sunday, March 6, 2011 at 7:32 pm EST
Answered on: Tuesday, May 14, 2024 at 2:24 am EDT
Question: Since 70E is not currently a legal requirement, at which point does a Safety Department enforce full PPE useage? We have books, tables, and absolutely no information on existing equipment arc flash boundries. Some of the equipment is 30 years old and working great. How do we assess that PE requirement?Tom
Enforcement of Full PPE Useage Without 70E Requirement
While NFPA 70E is not a legal requirement in many jurisdictions, it is widely recognized as a best practice for arc flash safety. Safety departments may enforce full PPE useage under the following circumstances: Company policy
Many companies have internal policies that require full PPE useage for certain tasks or in specific areas, regardless of 70E requirements.
Hazard assessment
If a hazard assessment determines that there is a significant risk of arc flash, the safety department may mandate full PPE useage for affected personnel.
Equipment inspection
If an inspection reveals that equipment is not adequately maintained or does not meet current safety standards, the safety department may require full PPE useage until the equipment is repaired or replaced.
Employee safety
The safety department has a primary responsibility to protect employee safety. If they believe that full PPE useage is necessary to mitigate risk, they may enforce it even without a specific 70E requirement.
Assessing PPE Requirements for Old Equipment
To assess the PPE requirement for old equipment where arc flash boundaries are unknown: Review maintenance records
Examine maintenance logs to determine the equipment's age, condition, and any repairs or upgrades that have been made.
Conduct a visual inspection
Inspect the equipment for any visible signs of damage, corrosion, or other wear.
Consult with manufacturer
Contact the equipment manufacturer for any available documentation or recommendations regarding arc flash protection.
Use industry best practices
Refer to industry standards, such as IEEE 1584 or IEC 61482-1, for guidance on PPE requirements based on estimated fault currents and other factors.*
Consider a worst-case scenario: Assume that the fault current is at its maximum possible value and determine the appropriate PPE level accordingly.It is important to note that the PPE requirement should be reassessed periodically, particularly after any significant changes to the equipment or its operating conditions. Flag for review