Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Elevators

User: cdcengineer, Location: Massachusetts

Asked on: Monday, March 7, 2011 at 6:13 pm EST
Answered on: Tuesday, May 14, 2024 at 2:26 am EDT

Question: Folks, a distant memory is flashing in my mind with something about "that an elevator must be fed with Cu conductors". Am I making this up, or perhaps is it an elevator code requirement? I don't see this requirement in NEC.Any input is greatly appreciated.

You are not making this up.

In older elevators, it was common to use iron conductors for elevator cables due to their high tensile strength. However, iron conductors are not as conductive as copper conductors, and they can become brittle over time.

Modern elevator codes require that elevators be fed with copper conductors. This is because copper conductors are more conductive and less likely to become brittle than iron conductors.

The NEC does not specifically require that elevators be fed with copper conductors. However, the NEC does require that all wiring in a building be installed in accordance with the National Electrical Code (NEC), and the NEC requires that electrical wiring be installed in a safe manner.Using iron conductors for elevator cables is not considered to be a safe practice, and therefore it is not permitted by the NEC. Flag for review

Previous Question Next Question