Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: CT Cabinet: # of Separate Laterals

User: Keri_WW, Location: Chapel Hill, NC

Asked on: Monday, March 7, 2011 at 7:49 pm EST
Answered on: Tuesday, May 14, 2024 at 2:26 am EDT

Question: I have an existing 600A CT cabinet feeding 3 separate panels. The owner wants to provide 2 more feeds from this same cabinet. Is this possible? What are the maximum number of laterals from a CT cabinet of this size (~3' x 4' x 1')?Thanks,Keri

Can an Additional 2 Feeders Be Added?

Yes, it is possible to add 2 more feeders from an existing 600A CT cabinet.

Maximum Number of Laterals from a CT Cabinet

The maximum number of laterals that can be fed from a CT cabinet varies based on several factors, including: Size and capacity of the CT cabinet Size and type of conductors used Installation method (e.g., surface-mounted or flush-mounted)

General Guidelines

For a CT cabinet of approximately 3' x 4' x 1', the following general guidelines apply:
Up to 6 feeders for conductor sizes up to 4/0 AWG Up to 4 feeders for conductor sizes from 250 kcmil to 500 kcmil Up to 3 feeders for conductor sizes from 600 kcmil to 800 kcmil

Specific Considerations for Your Case

To determine the maximum number of laterals in your specific case, you should consider the following factors:

Existing feeder loads

The existing loads on the 3 feeders in the cabinet will impact the available capacity for additional feeders.


Conductor size

The size of conductors used for the new feeders will affect the number of feeders that can be accommodated.

Installation space

There should be sufficient space in the cabinet for the additional feeders, including conductor bends and terminations.

Recommendations:


To ensure safety and compliance with electrical codes, it is recommended to consult with a qualified electrician to:
Evaluate the existing feeder loads and available capacity. Determine the appropriate conductor size for the new feeders. Verify that there is adequate space in the CT cabinet.* Obtain the necessary permits and approvals. Flag for review

Previous Question Next Question