User: dhalleron, Location: Louisville, KY
Asked on: Monday, March 7, 2011 at 9:35 pm EST
Answered on: Tuesday, May 14, 2024 at 2:27 am EDT
Question: I saw someone mention it in another thread. I always thought the identified conductor was the neutral or grounded conductor. Idenitified to me was the conductor with ridges, writing or white or gray color.For some reason I always check with my meter if the marking is anything other than color. I don?t trust the ridges or writing. The last chandelier I hung had writing on the conductor that was connected to the center tab of the sockets.I?m just curious how many people normally check polarity of a lamp socket? I always use my testor on receptacles, but don?t usually think about the lamp sockets.
It is not required by code to check the polarity of a lamp socket, but it is good practice to do so. The identified conductor (neutral) should always be connected to the center tab of the socket, and the ungrounded conductor (hot) should always be connected to the outer shell of the socket. If the polarity is reversed, it can create a shock hazard.To check the polarity of a lamp socket, you can use a non-contact voltage tester. Place the tip of the tester near the center tab of the socket. If the tester lights up, then the socket is polarized and the center tab is connected to the neutral conductor. If the tester does not light up, then the socket is not polarized and you should not connect it to a power source.There are some instances where the polarity of a lamp socket may not be important. For example, if you are using a lamp that does not have a polarized plug, then the polarity of the socket does not matter. However, it is always best to check the polarity of a lamp socket before connecting it to a power source, just to be safe. Flag for review