User: mark32, Location: Currently in NJ
Asked on: Monday, March 7, 2011 at 9:43 pm EST
Answered on: Tuesday, May 14, 2024 at 2:27 am EDT
Question: This is not something I am working on, I just want to know the correct way in which to wire it. Let's say there is a main disconnect, it feeds into a metallic trough which then taps off to a number of meters which then feeds it's respective disconnect that will then feed a sub panel. (There is a graphic in Mike's book on Grounding depicting this very scenario on page 60 figure 250-126 if you have it) All of the equipment, except for the sub panels, are all grouped together. So, the trough must be bonded via a bonding jumper from the disc neutral/ground bar to a lug/distribution block in the trough. EGC's then originate from this spot and bonded to the meter's enclosure in which the neutral block is isolated and from there to the disconnects and then panel. Because the trough and meters are on the load side of the main the metallic nipples are not required to have bonding bushings. Is all of the above correct and how would you do it differently? Is the meter I described necessary here?
Correct Wiring Method
The wiring method you described is generally correct and compliant with electrical codes. Here's a summary:1. Main Disconnect
The main disconnect supplies power to the metallic trough.2.
Metallic Trough
The trough is bonded to the neutral/ground bar of the main disconnect using a bonding jumper.3.
EGCs
Equipment grounding conductors (EGCs) originate from the distribution block in the trough and are bonded to:- Meter enclosures- Disconnect enclosures- Subpanel enclosures4.
Neutral and Ground
The neutral block in the meter enclosure is isolated to prevent current flow through the neutral conductor.5.
Metallic Nipples
Because the trough and meters are on the load side of the main disconnect, metallic nipples do not require bonding bushings.
Possible Improvement
One possible improvement to consider is using a solid EGC instead of multiple EGCs. This would simplify the wiring and reduce the number of connections.
Meter Necessity
The meter you described is not necessary in this scenario if the main disconnect is a circuit breaker. The circuit breaker acts as a meter, providing a visual indication of power flow and protection against short circuit and overload conditions.
Additional Considerations Grounding Electrode System
Ensure that there is a proper grounding electrode system in place, such as buried ground rods or a water pipe bonding connection.
Code Compliance
Always verify that the wiring conforms to all applicable electrical codes and standards, such as the National Electrical Code (NEC) or local codes.*
Safety: Follow all safety precautions when working with electrical equipment, including wearing appropriate personal protective equipment (PPE) and ensuring that the system is de-energized before making any modifications. Flag for review