Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Grounding on the Olds buildings

User: mustangcorp, Location: Florida

Asked on: Monday, March 7, 2011 at 11:05 pm EST
Answered on: Tuesday, May 14, 2024 at 2:27 am EDT

Question: In buildings of the 15 years old the ground the main switch is not linked to the structure, only has a connection to a ground rod. Our client needs to know whether to correct as specified in the 2008 NEC 250.52. If we have to do that what would be the appropriate solution.

Is correction required according to the 2008 NEC 250.52?

NEC 250.52 (2008) requires that the main grounding electrode system be connected to a metal underground water pipe, metal frame of the building, or other approved grounding electrode. In this case, the main switch is not connected to the building structure, so the main grounding electrode system is not meeting the requirements of NEC 250.
52. Therefore, correction is required.

Appropriate solution

To correct this issue, one of the following solutions can be implemented:

Connect the main switch to the building structure

This can be done by installing a grounding electrode conductor (GEC) between the main switch enclosure and the building steel frame. The GEC must be sized according to Table 250.122 and securely attached to the building structure and the main switch enclosure.


Install a separate grounding electrode

If the building structure is not accessible or suitable for grounding, a separate grounding electrode, such as a ground rod, can be installed. The ground rod must be at least 2.5 m (8 ft) long and driven into moist soil. A GEC would then be connected between the main switch enclosure and the ground rod.

Use a combination of methods

In some cases, it may be necessary to use a combination of methods to achieve proper grounding. For example, if the building structure is accessible but not suitable for grounding, a separate ground rod can be installed and connected to the building structure with a GEC.

Additional considerations:
The GEC must be protected from physical damage. The grounding system should be tested to ensure proper continuity and ground fault current path. It is recommended to consult with a licensed electrician for the design and installation of the grounding system. Flag for review

Previous Question Next Question