User: rodoffshore, Location: Henrico County, VA
Asked on: Tuesday, March 8, 2011 at 8:44 am EST
Answered on: Tuesday, May 14, 2024 at 2:28 am EDT
Question: Can a 208 delta primary with 208Y/120 secondary be used to replace a 230 delta primary with 230 secondary that is to be used as an isolation transformer for a 208 vfd? Both isolation transformers are rated at 51kVA.
No, a 208 delta primary with 208Y/120 secondary transformer cannot be used to replace a 230 delta primary with 230 secondary transformer for use as an isolation transformer for a 208 VFD.The primary voltage of the replacement transformer must match the primary voltage of the transformer being replaced. In this case, the primary voltage of the transformer being replaced is 230 volts, so the replacement transformer must also have a primary voltage of 230 volts. The primary voltage of the replacement transformer (208 volts) is not the same as the primary voltage of the transformer being replaced (230 volts), so it cannot be used as a replacement.Additionally, the secondary voltage of the replacement transformer must be compatible with the voltage requirements of the VFD. In this case, the VFD requires a 208-volt supply, so the secondary voltage of the replacement transformer must be 208 volts. The secondary voltage of the replacement transformer (208Y/120) is not 208 volts, so it cannot be used as a replacement. Flag for review