User: Lisa252, Location: Logan, Utah
Asked on: Tuesday, March 8, 2011 at 11:35 am EST
Answered on: Tuesday, May 14, 2024 at 2:29 am EDT
Question: Hi guys, I am new here and hope you don't mind someone who is not in the electrical field but who needs some knowledge/help from time to time. I am currently trying to diagnose what is wrong with my dryer and this is my first experience using an analog multimeter. I have watched videos and read the instructions for my meter, but I am still a little confused. The meter has settings of x10, x100, and x1000. If I get a reading of 15 when the dial is set to x10, does that mean the reading is 150 ohms? I would appreciate your help. Thanks.:grin:
Yes, that is correct. When the dial is set to x10, it means that the reading is multiplied by 10. Therefore, a reading of 15 when the dial is set to x10 means that the actual resistance is 150 ohms.Here is a breakdown of the different settings on your multimeter: x10
This setting multiplies the reading by 10.
x100
This setting multiplies the reading by 100.*
x1000: This setting multiplies the reading by 1000.The setting that you use will depend on the resistance of the circuit that you are measuring. For example, if you are measuring the resistance of a resistor, you would use the x10 setting. If you are measuring the resistance of a wire, you would use the x100 or x1000 setting.I hope this helps! Flag for review