Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: DC voltage on copper water lines

User: Bruce Coffman, Location: Roughly 5346 miles from Earls Court

Asked on: Tuesday, March 8, 2011 at 12:25 pm EST
Answered on: Tuesday, May 14, 2024 at 2:29 am EDT

Question: What would cause DC voltage to be present on copper water lines

Electrolytic corrosion

This occurs when two dissimilar metals are in contact with each other and are exposed to an electrolyte, such as water. The more active metal (copper, in this case) will corrode, and the less active metal (steel, in this case) will be protected. This can create a DC voltage between the two metals.


Stray current

This occurs when electrical current from another source, such as a nearby power line, flows through the water lines. This can also create a DC voltage between the water lines and the ground.*

Cathodic protection:
This is a technique used to protect metal structures from corrosion by connecting them to a more active metal, such as zinc. The zinc will corrode instead of the metal structure, and this can create a DC voltage between the two metals.If you are concerned about DC voltage on your copper water lines, you should contact a qualified electrician or plumber to investigate the cause and recommend a solution. Flag for review

Previous Question Next Question