User: Rutherford, Location: New York Adirondack region
Asked on: Tuesday, March 8, 2011 at 4:00 pm EST
Answered on: Tuesday, May 14, 2024 at 2:30 am EDT
Question: This is what I see under my sink and in my panel, new construction from 2001. The recep is not a GFCI type.It passed inspection then. Would it now?Is there a better way to wire for this?Since we are in the kitchen, a couple more questions on best practice and code.A group of duplex receptacles will be in a new kitchen, one on the side of the small island, the others on the backsplash wall above the counter. The plan is for plain no-GFCI receps, but a GFCI breaker for the branch circuit. Total recep count to here is five (5).Questions:May one of these be the power source for a countertop 1100W microwave?May we add one more recep to this circuit, for the refrigerator?
Under Sink and Panel Wiring Receptacle
The receptacle is not a GFCI type, which is now required by the 2023 National Electrical Code (NEC) for all 120-volt outlets within 6 feet of a water source.
Wiring
The wiring appears to be standard electrical wiring, which is acceptable for this application.
Inspection
The installation would not pass inspection today due to the lack of a GFCI receptacle.
Best Wiring Practice
To improve the safety and code compliance of this installation, it is recommended to replace the existing receptacle with a GFCI-protected receptacle. GFCIs help prevent electrical shock by detecting ground faults and interrupting the power supply.
Kitchen Receptacle Wiring GFCI Breaker Circuit
It is acceptable to use a GFCI breaker to protect multiple receptacles on a kitchen circuit. This provides GFCI protection to all outlets on the circuit without requiring individual GFCI receptacles.
Microwave Power Source
Yes, one of the duplex receptacles can be used as the power source for a countertop 1100W microwave. As long as the circuit is rated for the load, it is acceptable to connect the microwave to a regular receptacle.
Additional Receptacle
Yes, it is permissible to add one more receptacle to the circuit for the refrigerator. However, it is important to confirm that the circuit is not overloaded. The total load of all devices connected to the circuit must not exceed the circuit's ampacity.
Recommended Wiring Plan GFCI Receptacle
Install a GFCI-protected receptacle on the kitchen countertop near the sink.
Other Receptacles
Install regular duplex receptacles on the island and backsplash wall.
GFCI Breaker
Install a GFCI breaker in the electrical panel to provide GFCI protection to all receptacles on the circuit.
Microwave Connection
Connect the microwave to one of the regular duplex receptacles.*
Refrigerator Connection: Add an additional duplex receptacle for the refrigerator, connected to the same circuit. Flag for review