User: anbm, Location: Logan, Utah
Asked on: Tuesday, March 8, 2011 at 6:42 pm EST
Answered on: Tuesday, May 14, 2024 at 2:31 am EDT
Question: Building A and B belong to the same owner. Each building has separate service.Can we feed some branch circuits (20A/1PH, 120V or 277V) in building A from an electrical panel in building B? (because the panel in building B stays closer to the load). Thanks!
Typically, no.Article 210.4(A) of the National Electrical Code (NEC) prohibits supplying one building from another building's electrical service. This rule is in place to ensure that each building has its own independent electrical system and to prevent overloading of the electrical service in the supplying building.However, there are some exceptions to this rule. For example, Article 690.4(B) of the NEC allows for the use of a single electrical service to supply multiple buildings if the buildings are all under the same ownership and are located on the same property. In this case, the branch circuits in building A could be fed from an electrical panel in building B, provided that the following conditions are met:- The two buildings are under the same ownership.- The two buildings are located on the same property.- The electrical service is adequate to supply the load in both buildings.- The branch circuits are properly sized and protected. Flag for review