User: laketime, Location: NE (9.06 miles @5.9 Degrees from Winged Horses)
Asked on: Tuesday, March 8, 2011 at 8:33 pm EST
Answered on: Tuesday, May 14, 2024 at 2:31 am EDT
Question: I was reading some post regarding AFCI's and vacuums. I had a customer yesterday that keeps tripping his arch fault breaker with his vacuum. When the vacuum is plugged into different receptacles everything works fine. I told him not to worry about it that AFCI's have issues with vacuums. I did offer to change out the breaker if he would like but told him it was not necessary. Did I make the right call?
No, you did not make the right call.
AFCI Breakers and Vacuums AFCI (Arc Fault Circuit Interrupter) breakers are designed to detect and interrupt dangerous electrical arcs that can cause fires. Vacuums can create small arcing within their motors, which can trigger AFCI breakers. This is not a normal or acceptable occurrence.
Possible Causes for Tripping AFCI with Vacuums Faulty vacuum motor Loose or damaged electrical connections Overloading of the circuit by using too many appliances or devices on the same circuitActions You Should Have Taken Inspect the vacuum
Check for any visible damage or loose connections.
Inspect the electrical outlet and wiring
Ensure there are no loose or damaged wires or connections.
Test the vacuum on a separate circuit
If the vacuum trips the AFCI on multiple circuits, it is likely a problem with the vacuum itself.
Replace the AFCI breaker
If the vacuum operates normally on other circuits, the AFCI breaker may be faulty.
Why You Should Be Concerned Tripping AFCI breakers due to faulty vacuums is not a normal or acceptable situation. It indicates a potential electrical hazard that could lead to a fire. By ignoring the issue, you are potentially putting your customer at risk.
Recommended Course of Action Replace the AFCI breaker with a new one. If the vacuum still trips the breaker, contact the vacuum manufacturer for repair or replacement. Encourage your customer to follow proper vacuum usage guidelines, such as not overloading the vacuum or using extension cords. Flag for review