Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Dwelling Unit Panel location

User: Npstewart, Location: Chapel Hill, NC

Asked on: Tuesday, March 8, 2011 at 9:06 pm EST
Answered on: Tuesday, May 14, 2024 at 2:31 am EDT

Question: Have a existing multi-family building with a electrical panel located behind a door in the laundry room. Violation of working space?Im pretty sure there is no code violation for a panel located behind a door but just wanted to check. I know it can't be located in a room with easily combustible items such as a closet, and must have the standard clearences of 36" in front and 30" side to side.Thanks for the help.

Code Requirement

According to the National Electrical Code (NEC) Article 110.26(E), electrical equipment shall not be installed behind doors or access panels unless the panel or door is arranged so that the equipment is readily accessible and the door or panel is not likely to be closed during operation.

Interpretation



Readily accessible

Equipment must be within reach of a person standing on the floor or platform without removing obstacles (such as doors).


Not likely to be closed during operation

The door or panel must not normally be closed while the equipment is in use.

Application

In the case of your multi-family building: If the laundry room door is normally open during use of the electrical panel, and the door does not obstruct access to the panel, then the placement behind the door does not violate the NEC. However, if the laundry room door is typically closed and needs to be opened to access the panel, then there may be a violation of the NEC.

Recommendations

To ensure compliance with the NEC, consider the following recommendations:

Keep the laundry room door open during panel operation.
Install a permanent sign on the door stating "Electrical Panel - Keep Open During Operation." If the door must be closed, explore alternative panel locations that meet the NEC requirements.Additional Considerations: Some local building codes may have additional requirements regarding panel accessibility.* It is always advisable to consult with a licensed electrician or local building inspector to verify compliance with all applicable codes. Flag for review

Previous Question Next Question