Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Safety questions

User: puckman, Location: ridgewood, n.j.

Asked on: Wednesday, March 9, 2011 at 2:01 am EST
Answered on: Tuesday, May 14, 2024 at 2:32 am EDT

Question: Came across a situation today where in side a switchgear and b u generator room there are two side by side water or glycol pumps with in about 15 ' of the equipment, would this be a violation or at least a safety concern ?Do fire pumps and their controllers need to be fed from a seperate service in an industrial plant?These questions came up on a safety tour.Thanks for the help with this in advance.

Question 1: Pumps near Electrical Equipment Violation

Yes, it could be a violation of National Electric Code (NEC) Article 430.24.


Safety Concern

Water or glycol pumps located too close to electrical equipment can pose a safety risk due to the potential for water intrusion or splashing, which can damage the equipment or create electrical hazards.

Recommendation

The pumps should be relocated or separated from the electrical equipment by at least 25 feet, or other measures should be taken to prevent water intrusion or splashing.

Question 2: Fire Pump Feeding Requirements
Requirement

According to NFPA 20, Section 4.16.
1.1, "Fire pumps shall be provided with a reliable source of electrical power."


Separate Service

It is highly recommended to feed fire pumps and their controllers from a separate service. This ensures that the fire pumps will remain operational even in the event of a power outage to the main building service.


Two Feeders:
When feeding from a separate service, it is common practice to provide two independent feeders to the fire pump room. This provides redundancy and ensures that the fire pumps will continue to operate even if one feeder fails. Flag for review

Previous Question Next Question