Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Golf Cart storage

User: Chrisa44, Location: Logan, Utah

Asked on: Wednesday, March 9, 2011 at 12:20 pm EST
Answered on: Tuesday, May 14, 2024 at 2:33 am EDT

Question: Hey looking for some help on my calculations for the service neeeded for 125,15amp outlets with continuous load. Owner stating he would not be using all at one time covering but incase he does.

Assumptions

Outlets are 125 volts each. Continuous load means the outlets will be used at their maximum capacity for an extended period. Owner is not expected to use all outlets simultaneously.

Calculations

1.

Calculate the total amperage draw

Amperage = Voltage x Power FactorAssuming a power factor of 1:Amperage = 125 V x 15 A = 1875 A2.

Determine the required service size

The service size must be able to handle the maximum amperage draw. To determine the service size, you need to add a safety factor:Service Size = Total Amperage Draw x Safety FactorA typical safety factor for a commercial building is 1.25:Service Size = 1875 A x 1.25 = 2343.75 A3.

Round up to the nearest standard service size

The standard service sizes in the United States are:
200 amps 400 amps 800 amps 1200 amps 1600 ampsThe nearest standard service size above 2343.75 A is 2400 amps.

Conclusion

The service required for 125, 15-amp outlets with a continuous load is

2400 amps
. This size will ensure that the building has adequate power even if all the outlets are used simultaneously. However, it is important to note that the owner is not expected to use all the outlets simultaneously, so the actual amperage draw may be lower. Flag for review

Previous Question Next Question