Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 480 volt and 208 volt ground triads

User: scrino, Location: Plainfield, IN

Asked on: Wednesday, March 9, 2011 at 4:17 pm EST
Answered on: Tuesday, May 14, 2024 at 2:34 am EDT

Question: Scenario: A building is served by two outdoor pad mount transformers, one that is 480 volt secondary and one that is 208 volt secondary, and each transformer serves a respective indoor switchboard.My question is: if each switchboard is to have an outdoor triad ground, is there a minimum distance these ground rings should be spaced apart? Or should they be bonded together? Not the rods in relation to each other but the spacing between each system ground ring.

There is no requirement for a minimum distance between outdoor triad ground rings for different voltage systems serving different indoor switchboards. However, it is recommended to keep the ground rings separate and not bond them together.

Reasons for Keeping Ground Rings Separate



Safeguarding Different Voltage Systems

Keeping the ground rings separate helps maintain the integrity of each voltage system and prevents potential cross-contamination or imbalances.


Isolation During Fault Conditions

In the event of a fault, the ground rings should provide a low-impedance path to safely dissipate fault current. Bonding the rings together could create a parallel path that reduces the fault clearing current and potentially compromises protection systems.

Prevention of Ground Loops

Bonding the ground rings can create ground loops, which can lead to noise, interference, and voltage imbalances within the electrical system.

Exceptions

In some cases, bonding of ground rings may be required for specific reasons, such as:


Electrical Code Requirements

Certain electrical codes may require bonding between ground rings under specific circumstances.*

Special Conditions

In atypical scenarios where electrical interference or other issues arise, bonding may be necessary to mitigate problems.

Recommendation:


It is generally recommended to keep outdoor triad ground rings for different voltage systems separate. If bonding is deemed necessary, it should be done with caution and consideration of the potential consequences. Flag for review

Previous Question Next Question