Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Calculate Circuits

User: Alwayslearningelec, Location: NJ

Asked on: Thursday, March 10, 2011 at 10:10 am EST
Answered on: Tuesday, May 14, 2024 at 2:36 am EDT

Question: Ok, I have the wattage of the fixture, the quantity and know it's being feed from a 120/208 panel. How can i figure wire size and quantity of circuits?Thanks.

Step 1: Determine the Total Wattage

Multiply the wattage of each fixture by the quantity of fixtures to get the total wattage.Total wattage = Wattage per fixture x Number of fixturesStep 2: Calculate the Amperage

Divide the total wattage by the voltage to get the amperage.Amperage = Total wattage / Voltage (120V)Step 3: Select Wire Size

Refer to the National Electrical Code (NEC) to determine the appropriate wire size based on the amperage. For example, a wire gauge of 12 AWG or 10 AWG may be suitable.

Step 4: Determine Quantity of Circuits

Divide the total amperage by the maximum allowable amperage per circuit. The maximum allowable amperage typically ranges from 15A to 20A.Quantity of circuits = Total amperage / Maximum allowable amperage per circuitExample

Let's say you have 10 fixtures with a wattage of 60W each. The fixtures are being fed from a 120/208 panel.

Step 1

Total wattage = 60W x 10 = 600W

Step 2

Amperage = 600W / 120V = 5A

Step 3

Wire size: 12 AWG (for 5A)

Step 4

Quantity of circuits = 5A / 15A (assuming a maximum allowable amperage of 15A) = 0.33Since you can't have 0.33 of a circuit, you would round up to 1 circuit.

Conclusion:


You would need to use 12 AWG wire and a single circuit to power your 10 fixtures. Flag for review

Previous Question Next Question