User: chiversj, Location: Lockport, IL
Asked on: Thursday, March 10, 2011 at 10:41 am EST
Answered on: Tuesday, May 14, 2024 at 2:36 am EDT
Question: This is a transmitter installation that is about 7 years old. Three breakers are used to feed three receptacles but only one neutral is used to all three. So if I turn off one breaker and open the receptacle box, the white wire is engerized from the other circuits in use.Is this according to the code? Thanks
No, this is not according to code.
According to the National Electrical Code (NEC), each receptacle outlet must have its own dedicated neutral conductor. This means that three separate neutral conductors must be used to feed the three receptacles in this case.The reason for this requirement is to ensure that there is a complete circuit path for each receptacle. If only one neutral is used, and one of the breakers is turned off, the other receptacles will continue to be energized through the shared neutral. This can create a shock hazard if someone touches the receptacle while the breaker is off.In addition, the NEC requires that all neutral conductors be connected to the neutral bar in the electrical panel. This ensures that all of the neutral conductors are at the same electrical potential, which is necessary for proper operation of the electrical system.
To correct this violation, you will need to install three separate neutral conductors to feed the three receptacles. This can be done by running a new cable from the electrical panel to the receptacle box, or by using a wire nut to connect a new neutral conductor to the existing cable.
Once the new neutral conductors are installed, you can reconnect the receptacles and turn on the breakers. The receptacles should now be safe to use and will be in compliance with the NEC. Flag for review