Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Generator frequency decreasing when overloaded

User: philly, Location: NE (9.06 miles @5.9 Degrees from Winged Horses)

Asked on: Thursday, March 10, 2011 at 12:29 pm EST
Answered on: Tuesday, May 14, 2024 at 2:36 am EDT

Question: Can someone explain to me why a generators frequency will start to decrease or collapse when the generator is overloaded? I was looking at something that showed how frequency relays were used to detect generator overloads in order to perform load shedding operations.

Why a Generator's Frequency Decreases Under Overload

A generator's frequency is determined by its rotational speed and the number of poles in its stator winding. Under normal operating conditions, the generator's governor adjusts the fuel supply to maintain a constant rotational speed, which in turn maintains a constant frequency.When a generator is overloaded, it experiences an increased electrical load. This increased load requires more power from the generator, which translates into a higher demand for mechanical power from the engine driving the generator.However, the engine's mechanical power output is limited by its fuel supply and maximum speed. As the electrical load increases, the engine struggles to provide enough power to meet the demand. Consequently, the rotational speed of the generator begins to decrease.

Decrease in Rotational Speed and Frequency

As the generator's rotational speed decreases, the magnetic field strength in the stator winding decreases as well. This reduced magnetic field strength results in a lower electromotive force (EMF) being induced in the stator winding, which translates into a lower terminal voltage.The lower terminal voltage causes the frequency of the generator to decrease as well. This is because frequency is directly proportional to rotational speed and number of poles.

How Frequency Relays Detect Overloads

Frequency relays are used to detect generator overloads by monitoring the frequency of the generator's output voltage. When the generator is overloaded, its frequency will start to decrease as described above. The frequency relay detects this decrease in frequency and trips to activate load shedding operations.Load shedding operations disconnect non-essential loads from the generator to reduce the electrical load on the generator. This allows the generator to regain its stability and prevent a complete collapse of its frequency.

Additional Factors Contributing to Frequency Collapse

In addition to overloading, other factors can also contribute to a generator's frequency collapse: Poor fuel quality or fuel shortage Engine failure* Mechanical problems in the generator or its drive system Flag for review

Previous Question Next Question