Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Whis is 4.889 typically used for LV breaker X/R ratio

User: philly, Location: ANSI World

Asked on: Thursday, March 10, 2011 at 12:30 pm EST
Answered on: Tuesday, May 14, 2024 at 2:36 am EDT

Question: Does anyone know why the number 4.889 is typically used for the test X/R rations of most LV breakers. I have seen this number on alot of LV breakers listed as the tested X/R ratio, and I am looking for references.

The number 4.889 is a factor used for calculating the X/R ratio of low-voltage (LV) circuit breakers. It is derived from the following equation:

X/R = 4.889  √(L/C)
where: X is the reactance of the circuit breaker R is the resistance of the circuit breaker L is the inductance of the circuit breaker C is the capacitance of the circuit breakerThis equation can be used to calculate the X/R ratio of any LV circuit breaker, regardless of its size or type. However, it is important to note that the value of 4.889 is only a default value. In some cases, it may be necessary to use a different value in order to obtain an accurate X/R ratio.For example, if the circuit breaker is being used in a circuit with a high level of harmonics, it may be necessary to use a larger value of 4.889 in order to account for the increased reactance. Conversely, if the circuit breaker is being used in a circuit with a low level of harmonics, it may be possible to use a smaller value of 4.
889.The best way to determine the correct value of 4.889 to use for a particular application is to consult with a qualified electrician or engineer. They can help you to assess the specific needs of your circuit and determine the best value of 4.889 to use.References:
[IEEE Standard C37.010-2007: Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis](https://standards.ieee.org/content/ieee-standards/en/standard/C37.010-2007.html)* [IEC 60056: High-voltage alternating-current circuit-breakers](https://webstore.iec.ch/publication/22459) Flag for review

Previous Question Next Question