Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Just swapping out a old 100 amp Zinsco main panel question

User: zappy, Location: CA.

Asked on: Thursday, March 10, 2011 at 1:15 pm EST
Answered on: Tuesday, May 14, 2024 at 2:37 am EDT

Question: I'm going to install a new 100 amp main panel. Not adding any new circuits. Would I need to install AFCI breakers for the bedroom circuits? What if it's a multi-wire branch circuit, how would you protect it with a AFCI breaker? Also, when you install AFCI breakers on old wiring, do you usually have problems with them tripping? Thank you for your help.

AFCI Breakers for Bedrooms

According to the 2020 National Electrical Code (NEC), AFCI protection is required for all 120-volt, 15- and 20-amp branch circuits supplying bedroom receptacles. This includes both single-phase and multi-wire branch circuits.

Multi-Wire Branch Circuits (MWBC)

In a MWBC, two 120-volt circuits share a neutral wire. To protect a MWBC with an AFCI breaker, you must install a "tandem" AFCI breaker. A tandem breaker consists of two single-pole AFCI breakers that share a common trip mechanism.To install a tandem AFCI breaker on a MWBC: Connect the black wire from one circuit to the "Line 1" terminal on the tandem breaker. Connect the red wire from the other circuit to the "Line 2" terminal on the tandem breaker. Connect the shared neutral wire to the neutral terminal on the tandem breaker. Connect the ground wire to the ground terminal on the tandem breaker.

AFCIs on Old Wiring

AFCIs can sometimes trip nuisancely on old wiring. This is because AFCIs are designed to detect arcing faults, which can occur more frequently on older wiring due to loose connections, damaged insulation, or other imperfections.If you encounter nuisance tripping with AFCIs on old wiring, you can try the following: Inspect the wiring carefully for any loose connections or damage. Tighten all electrical connections. Replace any damaged wiring. If the problem persists, you may need to install surge protectors or line filters on sensitive electronic devices.

Recommendation

When installing a new main panel, it is a good idea to install AFCI breakers on all bedroom circuits, including MWBCs. Although AFCIs can sometimes trip nuisancely on old wiring, the added safety benefits they provide far outweigh the risks. Flag for review

Previous Question Next Question