Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: RGC Schedule 40

User: Alwayslearningelec, Location: NJ

Asked on: Thursday, March 10, 2011 at 3:30 pm EST
Answered on: Tuesday, May 14, 2024 at 2:37 am EDT

Question: I saw this on a drawings( RGC schedule 40). I believe this is incorrect and they either mesnt PVC sched 40 or RGS. I know there is PVC coated RGS but I don't think that's what they meant. DO you agree? THanks.

Yes, it is likely that the term "RGC schedule 40" is incorrect. Here's why: PVC Schedule 40

PVC (Polyvinyl Chloride) pipes are commonly used for plumbing and drainage systems. Schedule 40 refers to the thickness and pressure rating of the pipe, which is a standard specification for PVC pipes.


RGS

RGS (Rigid Galvanized Steel) is a type of steel pipe used for various applications, such as gas lines, water supply, and conduit. It is typically not used for drainage systems.

PVC-coated RGS

While PVC-coated RGS pipes exist, they are not commonly referred to as "RGC schedule 40." They are typically specified as "PVC-coated RGS" or "PVC-coated galvanized steel pipes."Based on this information, it is reasonable to assume that the intended term was either:


PVC Schedule 40

If the drawings are related to plumbing or drainage systems.*

RGS:
If the drawings are related to gas lines, water supply, or conduit.Without more context from the drawings, it is difficult to determine which term was intended. However, "RGC schedule 40" is an unlikely and confusing specification. Flag for review

Previous Question Next Question