Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Derating for multiple wires in a conduit.

User: xjfam, Location: pennsylvania

Asked on: Thursday, March 10, 2011 at 5:39 pm EST
Answered on: Tuesday, May 14, 2024 at 2:37 am EDT

Question: I have a job where I am running 12-2 M/C to the panel. I would like to install a trough to run the M/C thru and down multiple conduits into the panel. This means I will have to run a bunch of 3/4 EMT with 3 current carrying conductors or up it to 1-1/2 and splice #10 in the trough to run more circuits. The other option is to just run all the M/C into the top of the panel. That just doesn't look as clean.Anyone got any better ideas that I have missed? I just want it to look clean and it is on a tight budget.Thanks,

Improved Trough Options



Sleeve Inside Trough

Run all the MC cables through a large, flexible sleeve inside the trough. This centralizes the cables and allows for easy access for maintenance.


Perforated Trough

Use a trough with perforations that allow the MC cables to pass through without compromising the UL rating. This option provides a cleaner appearance and simplifies cable management.

Alternative Options



Surface Raceway

Install a surface raceway made for MC cables. This option requires less labor than installing a trough and provides a more visible solution.


Flexible Wiring Ducts

Use flexible wiring ducts as an alternative to a trough. These ducts can be shaped and bent to accommodate any configuration, providing a concealed yet accessible routing solution.

Wall-Mounted Enclosure

Mount a small enclosure on the wall and run all the MC cables into it. From there, use short pieces of THHN or XHHW conductors to connect the cables to the panel. This option is more permanent and requires additional labor.

Additional Considerations



Code Compliance

Ensure that the chosen solution complies with all applicable electrical codes regarding cable bending radius, fill ratios, and access.

Safety

Make sure that the trough or other solution provides adequate protection for the MC cables from physical damage and environmental hazards.


Cost

Consider the materials, labor, and aesthetic value when evaluating the different options.

Recommendation:


If the budget is tight, the perforated trough option is a good solution that provides a clean appearance and simplifies cable management. For a more cost-effective option, consider using a flexible wiring duct instead. Flag for review

Previous Question Next Question