User: Alwayslearningelec, Location: NJ
Asked on: Friday, March 11, 2011 at 12:45 pm EST
Answered on: Tuesday, May 14, 2024 at 2:40 am EDT
Question: Can these circuits be run in the same conduit? I know em/.norm are not. I think it is just an wire insulation issue.
Conduit Fill Requirements
Based on the provided information, it is not possible to determine if these circuits can be run in the same conduit without violating the conduit fill requirements. The conduit fill requirements depend on the number, size, and type of conductors in the conduit, as well as the conduit's trade size.
Voltage Limitations
EM/NORM: These circuits cannot be run together in the same conduit because EM/NORM is an acronym for "Emergency Normal" and refers to emergency lighting circuits, which are required to be kept separate from non-emergency circuits by code. All other circuits: No voltage limitations are mentioned in the context.
Insulation Issues
THWN: Thermoplastic High Voltage Water-Resistant Nylon-coated wire XHHW: Cross-Linked High Heat-Resistant Water-Resistant wireThese insulation types have different properties and voltage ratings. However, based on the brief description, it is unclear how their insulation characteristics would affect their ability to be run together in the same conduit.
Additional Information Required
To provide a more accurate answer, the following additional information is required: Trade size of the conduit Number and size of conductors in each circuit* Voltage rating of each circuit (if not already stated)
Recommendation:
Without the necessary information, it is advisable to consult with a qualified electrician or refer to the applicable electrical codes for guidance on running these circuits in the same conduit. Flag for review