User: qcroanoke, Location: Roanoke, VA.
Asked on: Friday, March 11, 2011 at 1:16 pm EST
Answered on: Tuesday, May 14, 2024 at 2:40 am EDT
Question: ok, I know how to wire a 3 way that's not the question.This is: If I have a feed and neutral (same circuit) at both locations will I be compliant bypulling a 14-2 w/g bettween them to use for travellers?
Yes, you will be compliant by pulling a 14-2 wire between two locations that both have a feed and neutral (same circuit) to use for travelers.NEC Requirements
According to the National Electrical Code (NEC), travelers for 3-way switches can be run in a 14-2 or 14-3 cable. The cable must be marked as "Type NM-B" or "Type UF" for indoor or outdoor use, respectively. The wire gauge must be a minimum of 14 AWG (American Wire Gauge) for both the travelers and the feed and neutral conductors. All connections must be made in approved electrical boxes.
Benefits of Using Separate Cable for Travelers
Improved safety
Separating the travelers from the feed and neutral conductors reduces the risk of short circuits and electrical fires.
Easier troubleshooting
If there is a problem with the travelers, it will be easier to identify and fix without affecting the power supply to the lights.
Increased flexibility
Using a separate cable allows you to run the travelers through different routes, which can be useful in certain situations, such as when obstacles are present.
Note: The 14-2 cable will not provide a separate ground wire. If grounding is required, you will need to run a separate ground wire or use a different type of cable, such as 14-3.* Make sure to follow all local electrical codes and consult with a qualified electrician if you are not comfortable performing the installation yourself. Flag for review