User: TPW, Location: Tennessee
Asked on: Friday, March 11, 2011 at 4:05 pm EST
Answered on: Tuesday, May 14, 2024 at 2:41 am EDT
Question: I have an instantaneous water heater that will be installed under a sink and requires two 40A circuits at 208V/1ph. I'm trying figure out the best way to provide disconnecting means for this equipment. I would prefer to not have lockable circuit breakers back at the panel.
Option 1: Surface-Mounted Disconnect Switch Install a surface-mounted disconnect switch near the water heater. Size the switch for 80A to handle the total current draw (2x 40A). Connect the switch to the water heater's power supply.
Option 2: Enclosed Disconnect Switch Install an enclosed disconnect switch inside a junction box or cabinet located near the water heater. Ensure the box or cabinet has a door that can be locked or secured. Size the switch for 80A. Connect the switch to the water heater's power supply.
Option 3: Circuit Breaker with Handle Tie Use a double-pole circuit breaker with a handle tie at the panel. Locate the circuit breaker in a dedicated location, such as a subpanel near the water heater. The handle tie will prevent both breakers from being turned off independently, ensuring a single point of disconnect.
Recommended Practice: For added safety, label the disconnect switch or circuit breaker clearly to indicate that it controls the water heater. Install the disconnect switch or circuit breaker at a height that is easily accessible for servicing.* Test the operation of the disconnect means regularly to ensure proper functionality. Flag for review