Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: What is the best equipment and method

User: Tonyrand, Location: Ware Shoals, South Carolina

Asked on: Saturday, March 12, 2011 at 5:46 pm EST
Answered on: Tuesday, May 14, 2024 at 2:44 am EDT

Question: I have a customer that is getting shocked when in the vicinity of a pool light , and pacemaker goes crazy. The pool lighting is 12V, on a GFCI breaker. All wiring and bonding looks good. Removed wet nitch light and found the #8 bonding conductor not connected to the shell. Customer replaced old metal shell with a plastic one and I connected the #8 to the metal ring on the shell.Did not solve problem.What is the best type of equipment to check for voltage in a pool (besides sticking your hand in)and the best method?

Equipment to Check for Voltage in a Pool Voltmeter with Ground Reference

This is the most accurate method to measure voltage in a pool. It measures the voltage between the water and a known ground source, such as the pool deck or equipment bonding.


Non-Contact Voltage Tester

A non-contact voltage tester can detect the presence of voltage without making contact with the water. However, it is not as accurate as a voltmeter.

Pool Leakage Current Detector

This specialized device measures the leakage current in the pool water. Increased leakage current can indicate a ground fault or other electrical issue.

Method for Checking Voltage in a Pool
Using a Voltmeter with Ground Reference

1. Ensure the voltmeter is set to measure AC voltage.
2. Clamp one test lead to the metal parts of the pool, such as the ladders, lights, or bonding plate.3. Connect the other test lead to a known ground source, such as the pool deck or a grounded metal pipe.
4. Read the voltmeter display to determine the voltage between the water and ground.


Using a Non-Contact Voltage Tester

1. Hold the tester close to the water, within a few inches.
2. If voltage is present, the tester will emit a sound and/or illuminate a light.3. Note that non-contact voltage testers can be affected by moisture and other factors, so it is important to use multiple methods for accurate verification.


Using a Pool Leakage Current Detector

1. Follow the manufacturer's instructions for the specific detector.
2. Submerge the detector in the pool water.3. Observe the display or indicator to determine if the leakage current is within acceptable limits.


Additional Considerations:
Perform voltage checks at multiple locations in the pool, including near the lights, ladders, and return jets. Inspect the entire electrical system for any obvious defects or loose connections. Have a qualified electrician troubleshoot the issue if voltage is detected and cannot be resolved by correcting grounding or bonding issues. Flag for review

Previous Question Next Question