Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Traffic Light Install???

User: horrorsix, Location: Harrisburg PA

Asked on: Sunday, March 13, 2011 at 8:43 am EDT
Answered on: Tuesday, May 14, 2024 at 2:45 am EDT

Question: A customer of mine has an actual traffic light that he wants wired up in his garage. He wants it to slowly flash from red, yellow, green. Does anyone know what kind of switching relay I would need to accomplish this? I checked with my local electrical supply house and they had no idea.

Solid State Relay (SSR)Features

Can handle the high current and inductive load of traffic lights Provides isolated control, preventing electrical interference Compact and reliable

Type

3-phase SSR with a load voltage rating suitable for the traffic light's AC voltage

Logic Controller

Programmable logic controller (PLC) or timer relay Capable of creating the desired flashing pattern

Wiring Diagram

1. Connect the AC power supply to the input terminals of the SSR.
2. Connect the traffic light wires to the output terminals of the SSR.3. Connect the control signal from the logic controller to the input terminals of the SSR.
4. Program the logic controller to generate a slow flashing pattern (e.g., 2-second on, 1-second off).


Example

SSR: Crydom D2440 (240A, 480 VAC) PLC: Allen-Bradley MicroLogix 1100

Note:
The flashing rate and duty cycle can be adjusted by modifying the logic controller's program. Ensure that the electrical wiring is performed by a qualified electrician according to local codes. Flag for review

Previous Question Next Question