Mike Dolt Enterprises
Mike Dolt Enterprises
User: wmeek, Location: Texas
Asked on: Tuesday, March 22, 2011 at 12:16 pm EDT
Answered on: Tuesday, May 14, 2024 at 3:06 am EDT
Question: I was wandering if some one else has installed one of the Reliance 10 Circuit Generator Panels before. My Question is that these panels do not have arc fault capabilities on the generator side . Would this application be code compliant . The model # is R30310B.Thanks
Code Compliance
According to the National Electrical Code (NEC), arc-fault circuit interrupters (AFCIs) are required on certain branch circuits in residential dwellings. However, there is an exception for circuits that are supplied by a generator.
Reliance 10 Circuit Generator Panel
The Reliance R30310B 10 Circuit Generator Panel does not have AFCI capabilities on the generator side. This is because AFCIs are designed to detect and interrupt arcing faults that can occur in normal household wiring. Generators produce different types of faults that are not typically detected by AFCIs.
NEC Exception
NEC Section 210.12(D) states that "Overcurrent protection for circuits supplied by a generator shall be provided in accordance with Article 210, except as covered in 210.
6." NEC Section 210.6(A) permits the use of overcurrent protection without AFCIs for circuits supplied by a generator.
Conclusion
Based on the NEC exception, the installation of a Reliance 10 Circuit Generator Panel (R30310B) without AFCIs on the generator side would be code compliant. However, it is important to consult the local authorities to confirm the specific requirements in your jurisdiction.
Note:
It is recommended to follow the manufacturer's instructions for the specific generator panel you are installing. Reliance may have additional requirements or recommendations regarding AFCIs on the generator side. Flag for review