Troubleshooting Steps



1. Check GFCI Outlets

Locate the GFCI outlets (usually in the bathroom or near the sink). Press the "Reset" button to restore power.

2. Check Circuit Breaker or Fuse

Go to the electrical panel and check if the circuit breaker or fuse for the bathroom is tripped or blown. Reset the circuit breaker or replace the fuse.

3. Inspect Wiring

Remove the faceplates of the receptacles and switches. Check if any wires are loose or damaged. Tighten loose wires and replace damaged ones if necessary.

4. Test Receptacles

Use a voltage tester to check if there is power coming to the receptacles. If there is no power, the wiring may be faulty.

5. Reset AFCI Breaker

If your electrical panel has AFCI breakers, they may have tripped due to a sudden power surge. Locate the AFCI breaker and reset it.

6. Call an Electrician

If none of the above steps resolve the issue, it is recommended to call a licensed electrician for further troubleshooting and repair.

Additional Tips: Unplug all devices from the receptacles before troubleshooting. Use caution when working with electricity. Turn off the power at the electrical panel before inspecting wiring. If you are not comfortable with any of the troubleshooting steps, seek professional help from a qualified electrician. Flag for review