Mike Dolt Enterprises
Mike Dolt Enterprises
User: navyman, Location: Lehigh county,PA
Asked on: Tuesday, April 5, 2011 at 5:07 pm EDT
Answered on: Tuesday, May 14, 2024 at 3:48 am EDT
Question: I need to re-wire my own portable pizza oven. What type of wire should i use? I found the type of heater cord in article 400.4 for the flexible cord and plug. Do you also know the type of connectors to use? The oven thermostat has a setting to go to 500 degrees F. Thanks.
Wire
Use high-temperature wire specifically rated for appliances or ovens. The wire should be rated for at least 500 degrees Fahrenheit. Common types of high-temperature wire include: Type FEP Type PFA Type ETFE
Cord and Plug
Use a flexible cord and plug that complies with Article 400.4 of the Electrical Code (NEC). This is typically a Type SO or SJO cord with a NEMA 6-15 plug.
Connectors
Use heat-resistant connectors that are suitable for high temperatures and the type of wire you are using. Common types of heat-resistant connectors include: Ceramic terminal blocks High-temperature wire nuts Crimp connectors with silicone seals
Specific Recommendations
Based on the following information: Thermostat setting: 500 degrees F Type of heating element: Not specified
Wire
Recommended type
Type FEP or PFA wire
Size
Based on the amperage of the heating element. Refer to the manufacturer's specifications or consult an electrician.
Cord and Plug
Type
Type SO or SJO cord
Size
Based on the amperage of the heating element. Refer to the manufacturer's specifications or consult an electrician.
Plug
NEMA 6-15
Connectors
Type
Ceramic terminal blocks or crimp connectors with silicone seals
Additional Considerations: Ensure the oven is properly grounded. Use caution when handling high-temperature wires and connectors. It is highly recommended to consult with a qualified electrician for assistance with wiring and safety measures. Flag for review