Mike Dolt Enterprises
Mike Dolt Enterprises
User: [email protected], Location: NYC
Asked on: Saturday, April 9, 2011 at 5:39 pm EDT
Answered on: Tuesday, May 14, 2024 at 4:00 am EDT
Question: While relocating a dukane nurses call 2 light station the legs of 2 resistors wired in parallel snapped,they are both glass, red on either end,a black band on one side,SFD printed on one side and 08 on the other.does anyone know what I need to replace this?
The resistors you describe are likely 0.8 ohm, 1/2 watt carbon film resistors. They can be replaced with similar resistors of the same resistance and wattage. You can find these resistors at most electronics stores or online. Here is an example of a suitable replacement resistor:https://www.digikey.com/en/products/detail/yageo/CF08000000500RC/1003630 Flag for review